View Source

To connect 4W (4-wire) between a FSII-BASE-II & RTS Matrix XCP-RJ11/12/RJ45 Breakout Panel 4W, you need to switch your selected 4W Port Function on the FSII-BASE-II to: TO PANEL

Attached is an excerpt from the FSII-BASE-II User Guide (ref 399G169D.pdf; page 106):

Solution Finder > FSII-BASE-II 4-Wire (4W) to RTS CRONUS 4-Wire (4W) > fsii-base-ii 4w port function & pinout.jpg

Pinout for various Port Function as shown on the Left.

How to set Port Function on CCM?

Solution Finder > FSII-BASE-II 4-Wire (4W) to RTS CRONUS 4-Wire (4W) > image-20200219-064954.png

How to set Port Function on Front Panel?

Here you can find the various pinout diagrams for the RTS Digital Matrix’s XCP-40-RJ11(RJ12) & XCP-48-RJ45 breakout panels (full pdf attached below):

Solution Finder > FSII-BASE-II 4-Wire (4W) to RTS CRONUS 4-Wire (4W) > rts-xcp-40-rj11 pinout.jpeg

Solution Finder > FSII-BASE-II 4-Wire (4W) to RTS CRONUS 4-Wire (4W) > rts-xcp-48-rj45 pinout.jpeg

Additional Technical Details

RTS XCP-40-RJ11:

RTS XCP-48-RJ45:

Additional Technical Details

FSII-BASE-II User Guide: https://clearcom.com/DownloadCenter/manuals/FreeSpeakII_BaseII_v1.5/FSII-BASE-II_User_Guide-399G169D.pdf

Related articles