Note: The SIP enabled port MUST be put in a Channel before you can make and accept calls. - Accept incoming calls
- If an external user (for example x.2005) dials into the LQ-SIP line then the LQ unit will auto-answer and establish the call. Audio will then pass between all members of the Channel associated with the SIP line.
- The CCM will show the incoming caller number.
- The CCM user can hang up the call by selecting the phone icon and hanging up.
- Use the CCM to dial out: Click image to enlarge/minimize
- Type in the dial-out window the phone number or address of the telephoneline/extension you want to reach.
- Once the call is established, audio will pass between all members of the Channel associated with the SIP line.
- The CCM will show the dialed phone number.
- The CCM user can hang up the call by selecting the phone icon and hanging up.
Note: SIP calls can also be hung up (ended) from the LQ device front panel menu. Note: You can define as many SIP clients as you need, but only 8 can be registered (connected to an LQ device) at any one time. Note: SIP line connection status bars: green; connected, yellow; connecting, connections pending. Note: You will see a VOX light in the Assignments page. This lights green when audio is coming from a port. |