How can I add a Telephone (TEL-14 or LQ-SIP) into a partylines

Owned by erik.devane@clearcom.com, created
Last updated: Nov 05, 2021 by ernie addow
2 min read

Using EHX v12.2 is it currently not possible to add a telephone (TEL-14 or LQ-SIP) as a member of a PL. The ability to add telephone members to partylines has been removed.

Here is a workaround:

  1. Create a Route from the Telephone to the PL, make it bidirectional (talk and reverse listen).

  2. Create a Control.

  3. Add the Route to the Control.

  4. Test the control on a panel. You should see Diagnostic > Crosspoint Map crosspoints made from the telephone to anyone listening on the partyline.

  5. Make it always trigger by doing Configuration >Logic > New.

Drag on a Latch, and a Control Output (O/P). Connect to the /Q (q-bar, normally closed) to the Control O/P and then add the new control into the O/P control area.

Assign the TEL-14 key per normal to your panel for dialling out

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.